Dual Action Hand Spray Gun® (Model shown RT-24-300-70)
We are Manufacturer, Supplier and Exporter of Dual Action Hand Spray Guns RT-24-300-70 and our
setup is situated in Pune, Maharashtra, India
Roll & Grip® make Dual Action Hand Spray Gun® RT-24 is ideal for spraying of
release agent in rubber moulds, tyre moulds, PU Foam moulds etc. It provides a gentle spray, very
suitable for moulds requiring fine coating of release agent. The spray gun uses compressed air for
spraying the release agent. The compressed air and the release agent are supplied to the spray gun
through two PU tube Push type fittings, one for air and the other for release agent. The spray gun
has a liquid control valve for controlling quantity of release agent being sprayed. The long
aluminium bend pipe of the spray gun provides easy access to all parts of mould from safe working
distance. The angle of bend of the aluminium pipe ensures proper reach and application of release
agent to innermost and difficult to reach mould parts
Dual Action Hand Spray Gun® Model RT-24
The air is needed at pressure 0.75 Kg/cm
2 or more. The release agent may be supplied by
gravity feeding arrangement or by pressure feeding arrangement. For gravity feed keep the die coat
container at least 8 feet above the spray gun level. If using pressure feeding arrangement the
liquid pressure can be set above 0.2 Kg/cm
2.
The atomization of die coat depends on air pressure and die coat supply pressure/quantity dispensed.
Higher air pressure and lower liquid pressure/quantity gives finer atomisation and vice versa. The
quantity of liquid dispensed depends on liquid supply pressure and setting of liquid control valve
on the spray gun.
The Dual Action Hand Spray Gun® RT-24 comes with different lengths of aluminium bend pipe and
with different angle of bend to suit the requirement. e.g. RT-24-300-70 (300mm long Al. pipe with
70° bend), RT-24-450-30 (450mm long Al. pipe with 30° bend) etc. The length and angle of bend of the
aluminium pipe should be selected considering the size of machine, size of mould and the distance
between operator and the mould. Aluminium pipe with 70° bend is suitable for most of the applications
however, different angle of bend can be provided to suit the customer requirement.
